DC 5.2.0 1 AAD: Requirements

In order for AAD to work, you need to make sure that the following requirements are met.

1: Access to your AAD Azure Account

Access https://portal.azure.com and login.

If you're able to see "Azure Active Directory" - you meet this requirement

NOTE: Azure Active Directory Group membership syncronization to DC requires Azure Subscription levels "Premium P1" or "Premium P2"

2: AD and ADFS must be disabled

Access the product or products (DC and or MM) you want to enable AAD login for and verify that you are met with the standard Digizuite login screen (and not ADFS or AD). 

If you are not met with a prompt - asking for you to login with AD or ADFS - you meet this requirement and can go ahead with configuring AAD.

3: The ID of a user of which you want all your users to look like (AAD Template User)

Per default the DAM Center is configured with two users, that are "copied" every time either a collection or self-signup user has been created by the system. These two are just users, like any other user. The thing that sets them apart is that their passwords usually is something that's meant never to be written again, and that their member ID's have been set to be called upon by the system.

Usually the self-signup user named "self-sign up template user" has been set up correctly if you already have the self-signup functionality enabled in your Media Manager. If this is the case, usually this user can be used for automatic assigning of roles when creating AAD users. Remember this user's user ID then (usually this is something like "300xx")

If you don't want to use the previously mentioned template user, you'll have to create a new user. You do this by doing the following steps:Login to your DAM Center with a Super Administrator or an Administrator user

1. Go to System tools → Users and groups → Users → System users and press Add
2. In the Username field, you type in "AAD Template User", in the password field you type in something random, and in the Metagroup field "User Config" and press create
3. 
4. Now make a note about your new user's user ID
5. 
6. Now edit the user's roles by expanding the right side Edit menu - and then make sure that you're in the view named "Standard" now add the following groups
   1. Internal access
   2. Light user or Content Creator
   3. Public access
   4. Trusted (usually, already added by default)
7. 
8. Press save

The ID you've noted down will be used in a upcoming section, where you have to edit some XML.

4: Create Groups in Dam Center that reflects Active Directory Groups

Navigate to System Tools / Groups in Dam Center / Users and groups / Groups.

Create a Folder by right clicking Groups and selecting Add folder

Name the new folder "Azure Active Directory"

Select the new Folder.

In the Azure Portal Navigate to "Azure Active Directory" / "Groups"

The Object Id is used to bind the Active Directory Group to a DamCenter Group.

Repeat for each Azure Active Directory group that should grant access to DamCenter

Click "Add", and Give the new DamCenter Group a name.

Click "Create"

Select the new Group, and edit in the right pane.

• Fill the "Binding group name" with the object Id from the azure groups "Object Id" field
• Check the "Is Binding group" checkbox
• Select DamCenter Groups, users that are member of the Azure Group should be member of.
• Click Save.

Repeat for each Azure group that should be mapped.

5: You must make an App Registration on DC and/or MM in Azure

DC and MM are atm. the only two products we offer, that requires AAD registration to work with AAD.

You should only register the products you want to enable AAD login for.

I.e. if you choose to have MM as the only application which prompts for users' AAD credentials, your DAM Center application should not be registered.

You register your product by doing the following steps:

1. Access https://portal.azure.com with your Azure credentials, you have from the first requirement (Access to your AAD Azure Account)
2. Access "Azure Active Directory" (see image)
3. 
4. In here, press the "App registrations" beneath "Manage" (See image)
5. 
6. Now press the "New application registration"
7. 
8. In the "Name" and "Sign-on URL" fields, you copy-paste the entire URL of your application
9. 
10. Press  in the bottom
    
    
11. Repeat the process for the product you didn't just configure (The MM if you set up the DC, and vice versa)
    
    
12. When this is done, make a note of the Application ID's of the new App registrations you've just made
    
    
    
13. Click "Authentication" in the left pane.
14. Add Web Redirect UrIs to;
    
    1. https://<damurl>
    2. https://<damurl>/LoginService
15. Check Access tokens and ID tokens and click Save
16. Now go into the app registration. Press Settings, and then Properties
    
    
17. Make a note of the App ID URI without https:// and GUID

    Example

    For example "https://digizuite.onmicrosoft.com/95303ff7-f100-47ab-ad3a-2a465ff47bd0" becomes "digizuite.onmicrosoft.com"

Configuration for Active Directory Group membership syncronization.

• Select Manifest in the left pane
• Modify the Json document, by modifying the line "groupMembershipClaims": null, to "groupMembershipClaims" : "SecurityGroup",
  
  
  
  

Valid options for groupMembershipClaims are;

• "All"
• "SecurityGroup"
• "DestributionList"
• "DirectoryRole"

see: https://docs.microsoft.com/en-us/azure/active-directory/develop/active-directory-optional-claims