DC 5.5 Import configuration

There are 3 levels of configuration. This section describes the import configuration. All import configurations are xml-files located in a subfolder of the Importer installation named ImportConfigs. Every xml-file in this subfolder will be perceived as a configuration file. Only files with xml extension are read. Everything else is ignored. Here is a list of all possible configurations.

  <LanguageId></LanguageId>
  <UploadDirectory></UploadDirectory>
  <SheetDirectory></SheetDirectory>
  <ZipContentDirectory></ZipContentDirectory>
  <SuccessDirectory></SuccessDirectory>
  <FailureDirectory></FailureDirectory>
  <DeleteEmptyDirectories></DeleteEmptyDirectories>
  <RunUpload></RunUpload>
  <ComputerName></ComputerName>
  <UploadChunkSize></UploadChunkSize>
  <FileNameStampType></FileNameStampType>
  <FileNameStampMetafieldId></FileNameStampMetafieldId>
  <LastWriteDelayBeforeUpload></LastWriteDelayBeforeUpload>
  <TreatZeroByteFilesAsFailed></TreatZeroByteFilesAsFailed>
  <RunMetadataUpdate></RunMetadataUpdate>
  <MetadataFileName></MetadataFileName>
  <Culture></Culture>
  <BulkSize></BulkSize>
  <MetadataParser></MetadataParser>
  <ComboSeparator></ComboSeparator>
  <ComboMatchStyle></ComboMatchStyle>
  <FilenameColumn></FilenameColumn>
  <MetafieldIdRow></MetafieldIdRow>
  <DataStartRow></DataStartRow>
  <MatchSearchName></MatchSearchName>
  <MatchTokenColumn></MatchTokenColumn>
  <MatchTokenTag></MatchTokenTag>
  <MatchTokenFallbackType></MatchTokenFallbackType>
  <MatchBatchSize></MatchBatchSize>
  <ArchiveOnReplace></ArchiveOnReplace>
  <Active>false</Active>

Key	Description	Data type / description	Default value ¹⁾	In use when
LanguageId	A valid DAM system language ID.	Integer	None	Always. Required.
UploadDirectory	The hotfolder to watch for input.	String	None	Always. Required.
SheetDirectory	Directory for metadata sheets. When left empty it defaults to UploadDirectory.	String	None	When RunMetadata is true and MetadataParser is CSV or Excel. Optional.
ZipContentDirectory	Directory for zipped content. Zip content will be unpacked to UploadDirectory.	String	Nonde	Whenever set this directory will always be checked first and all content unzipped before reading UploadDirectory.
SuccessDirectory	Where to put files successfully uploaded - including metadata files. Leave empty to simply delete these files.	String	Empty	Always. Optional.
FailureDirectory	Where to put files that failed during upload og metadata processing. Leave empty to simply leave failed in place in which case they will be retried. It is recommended to set this to avoid having the Importer repeatedly try and fail.	String	Empty	Always. Optional.
DeleteEmptyDirectories	When true all empty directories below UploadDirectory will be deleted after files and/or metadata have been ingested.	Boolean	False	Always. Optional.
RunUpload	Set true when in need of asset ingest.	Boolean	False	Always. Optional, but if not set RunMetadata must be true.
ComputerName	An identification token of the uploading application.	String	Importer	When RunUpload is true. Optional.
UploadChunkSize	Size in bytes of chunks when uploading files.	Integer / cannot be lower than 1mb	26214400 (25mb) ²⁾	When RunUpload is true. Optional.
FileNameStampType	How filename is stamped. Example: FileNameOnly: AwesomeMe.jpg FileNameNoExtension: AwesomeMe RelativePath: \GoodStuff\AwesomeMe.jpg (if AbsolutePath C:\Upload\GoodStuff\AwesomeMe.jpg	Enum: FileNameOnly FileNameNoExtension (5.2.1+) RelativePath AbsolutePath	RelativePath	When RunUpload is true and FileNameStampMetafieldId is set. Optional. Important: This stamp value is sent to the DAM Import match search when looking for replacement candidates. Please choose the appropriate stamp value, depending on the metadata field you match on.
FileNameStampMetafieldId	Id of metafield where filename will be stamped.	Integer	None	When RunUpload is true. Optional.
LastWriteDelayBeforeUpload	Delay in seconds from a file has last been written to the Importer will upload it. The default is zero and this has been the default behavior for the Importer since the beginning. Leave this at 0 unless using FTP or perhaps a 3rd party file integration that fails even when TreatZeroByteFilesAsFailed is false.	Integer	0	When RunUpload is true. Optional.
TreatZeroByteFilesAsFailed	How to handle zero-byte failes. True will handle them as failed files. False will ignore and essentially retry again later. It is important to set this false when input is ftp or similar input that allocates a zero-byte file and writes it later. The default is false and this alters the behavior which before the introduction of this setting always treated zero-byte files as failed. This setting was introduced in the 5.4.0-139 build.	Boolean	False	When RunUpload is true. Optional.
RunMetadataUpdate	Set true when i need of metadata ingest.	Boolean	False	Always. Optional, but if not set RunUpload must be true.
MetadataFileName	A fullpath reference to a file containing metadata configuration. See Metadata Configuration.	String	None	When RunMetadata is true and metadata is preconfigured (Xml2Metadata).
Culture	A standard string describing a culture setting. See Culture names and identifiers for supported values.	String	en-US	When RunMetadata is true and there are any dates or floating points in the metadata input.
BulkSize	How many assets are updated in one bulk.	Integer	5	When RunMetadata is true.
MetadataParser	The type of medata input. CSV: when metadata is a CSV sheet. Excel: when metadata is an Excel sheet. Xml2Metadata: when metadata is an xml file.	Enum: CSV Excel Xml2Metadata	None	When RunMetadata is true. Required then and ignored otherwise.
ComboSeparator	When special character to use as delimiter for values of any combo or tree type.	1 special character.	;	When RunMetadata is true and MetadataParser is any of the sheet types. Optional (but required if your delimiter is different from the default.
ComboMatchStyle	When matching input values against existing tree- or combovalues should the importer user textvalue or optionvalue.	Enum: TextValue Option	TextValue	When RunMetadata is true this settings will have an effect for every metafield of tree- or combotype. It is possible to specify for specific metafields in which case this setting is ignored.
FileNameColumn	Which column in the sheet holds the filename of the file to upload.	Integer (1-based index)	None	When RunMetadata and RunUpload are both true and input type is any of the sheet types.
MetafieldIdRow	Which row in the sheet holds the metadata configuration (metafield IDs).	Integer (1-based index)	None	When RunMetadata and RunUpload are both true and input type is any of the sheet types.
DataStartRow	Which row in the sheet does data start. This allows the sheet to contain 1 or more rows in the beginning which are ignored by the Importer.	Integer (1-based index)	None	When RunMetadata and RunUpload are both true and input type is any of the sheet types.
MatchSearchName	When set a search will be executed the purpose of which varies with configuration: RunUpload is true: The search result will be used to determine if an asset must be replaced. RunMetadata is true and RunUpload is false: The search result is used to determine the asset to be metadata updated.	String matching a valid DAM search.	None but "DamImporterMatchSearch" comes with the importer	Always if set.
MatchTokenColumn	Which column in the sheet holds the token to use as input for MatchSearchName	Integer (1-based index)	None	When MatchSearchName is set and MetadataParser is any of the sheet types. Optional.
MatchTokenTag	Which tag in the xml holds the token to use as input for MatchSearchName	String	None	When MatchSearchName is set and MetadataParser is Xml2Metadata. Optional.
MatchTokenFallbackType	When MatchTokenColumn / MatchTokenTag are either not set or the value is empty a fallback is made to the filename of the uploaded asset (and thus is only possible when RunUpload is true).	Enum: FileNameOnly FileNameNoExtension (5.2.1+) RelativePath AbsolutePath	RelativePath	When RunUpload is true, MatchSearchName is set and MatchTokenColumn / MatchTokenTag are unset or the value thereof is empty. Optional unless the default differs from what is needed.
MatchBatchSize	How many match tokens are queried at a time.	Integer between 1 and 100	10	Only in effect when RunUpload is false and RunMetadata is true as in an upload scenario tokens are always quesried one at a time. This setting was introduced in DAM 5.1.1.
ArchiveOnReplace	Whether to overwrite (false) or archive (true) an asset when replacing.	Boolean	False	When RunUpload is true, MatchSearchName is set. Optional unless the default differs from what is needed.

Default value is in effect when the xml element is empty or not present at all.
Higher numbers may increase performance on fast networks. Test with debug logging to see timings.