To install the Office Connector (henceforth referred to as OC), install an additional Media Manager 5 (MM) as you normally would.

This installation must point to a separate child configuration made for OC.

Admin Configuration

Next, download the following file:

Replace all references to localhost, with the OC site reference. E.g. if OC/MM is installed at mm.digizuite.com, then replace localhost with mm.digizuite.com/oc. 

If there are any labels that need to be changed in the ribbon, they are found in the bottom of the XML file, and can be replaced as one sees fit. 

Now the XML file is ready to be installed distributed via an Office 356 admin account

Install the connector by following the installation steps found in this documentation  https://docs.microsoft.com/en-us/office/dev/add-ins/publish/centralized-deployment 

Installing on the client computers

Now make sure that your Office instance is logged in.

There are two options for logging in - one is for the licensing of the Office product itself, whereas the other one is for your account.

Go to File → Account and login. The image below shows which is the correct option to login with:

Click the Insert tab in the top of your Office program.

Now click My Add-ins (See image)

In the following dialog, go to ADMIN MANAGED. In here, the connector should now be an option

The Open button will then be available on the insert ribbon page. 

You should now have a button called Digizuite to the far right of the connector. Press this button

Login using a user set up to use OC.

Now you should be able to use the connector as you'd like to see fit.

If you want to install it for another computer - you need to do the last steps again - starting from the section where you access the Office Add-ins and press ADMIN MANAGED.

If you have installed OC on a device for one Office product (e.g. Word), you will automatically get the connector on the two remaining Office products (e.g. Excel and PowerPoint).